Prebena 9A-MGS-55, Operating Manual

Page: 66 / 192

Preparing the electrical tool
18
Check condition
WARNING
Do not operate the electrical tool or its
accessories when any sign of damage is
apparent, risk of injury.
Always check the condition of the electrical
tool before use.
Use electrical tools only when they are in
proper working order.
Check the following items in particular:
-
The power plug and the supply cable of the battery charger
must be in good order and without damages.
- The on/off switch must not be damaged.
- All the parts of the auto feed screwdriver and all accessories
must be securely attached.
- The rechargeable battery pack must have been charged.
- No part of the electrical tool or its accessories may have
exterior damages like scratches, cracks or dents.
Scratches in the housing are not regarded as damages.
Do not connect a damaged electrical tool to a power supply.
Make sure that damaged electrical tools are repaired by trained
technicians before you put it into service.