Prebena 9A-MGS-55, Operating Manual

Page: 70 / 192

Preparing the electrical tool
22
Loading fasteners
You can use the auto feed screwdriver using collated screws to carry
out repetitive screw and fastening activities economically.
CAUTION
Improper screws can lead to injury, may impair
proper operation or damage the auto feed
screwdriver.
Use only PREBENA screws mentioned in
the chapter “Ordering accessories“.
Use the proper bit for the size and form of the screw being inserted.
To change of the bit, see page …
CAUTION
Improper bits can lead to injury, may impair
proper operation or damage the auto feed
screwdriver.
Use only bits and screws with a matching
size and form.
Adjusting the depth stop
The depth stop must be adjusted in accordance with the length of the
screw being used.
Proceed as follows to adjust the depth stop:
Release locking screw (17) of depth stop (16) using socket
wrench (19).
Adjust the depth stop (16) according to the length of the screw
being used.