Via Pro/Via Mini User’s Guide: Dialogue AAC
21
Attaching a Wheelchair Mounting Plate
Three threaded holes are provided on the back of the device for attaching an optional wheelchair
mounting plate.
If you purchased the wheelchair mounting plate accessory, follow these instructions to attach the plate
to your device. A Via Mini device is shown here. The procedure is the same for a Via Pro device.
1.
Place the device face-down on a flat surface. Be careful not to scratch the display.
2.
Align the three tapered holes in the mounting plate with the three threaded holes on the back of
the device.
Important!
Be sure that the mounting plate is oriented so that the additional hole for the holding
pin is in the upper left.
3.
Insert and tighten the three screws.
Threaded holes for attaching a mounting plate
Mounting plate attached