Pramac Pmi3000, Operator'S Manual, Page: 23 / 153

20
9. Troubleshooting
Engine doesn’t work
：
no
yes no
yes no
yes no
yes no still no
check
：
1. Remove the spark plug cover and
clean around the spark plug stolen
goods
2. Remove the spark plug, put the
spark plug into spark plug cap
3. Connect spark plug side electrode to
cylinder head for ground protection
4. Pull the starter handle, the spark gap
should spark
check
：
1. close fuel valve, open fuel screw
2. When opening fuel valve, fuel should
flow out from fuel outlet
Contact PRAMAC service. Change spark plug
Fill with recommended oil
Open fuel switch
Switch to “ON” position
Refueling Is there fuel in the fuel tank?
Is the engine switch in “ON” position?
Is fuel switch on?
Is there enough engine oil?
Spark plug has a spark?
Make sure no fuel spill around the
spark plug. Overflow fuel could catch
fire.
Fuel reaches the carburetor?
If engine still doesn’t work, contact
PRAMAC service.