ITX 3000/2000 Printer User Manual
(UMITX315.PDF
)
17
SPECIFICATIONS
Specifications subject to change without notice.
Printing Method:
Direct Thermal
Printhead:
Dot Density
203 DPI (8 dots/mm)
ITX 2000
Dot Density
300 DPI (11.8 dots/mm)
ITX 3000
Dot Cycle Life
50x10
6
Dot Cycles (typical)
Abrasive Life
164K ft (50Km) typical
Operation
Dot History Controlled
Temperature Thermistor
Controlled
Print Speed:
10.0 in/sec Max. (254 mm/sec) ITX 2000
8.0 in/sec Max. (203 mm/sec) ITX 3000
FGL Resident Fonts:
5x7; 5x9 (OCRA); 8x16; 13x20 (OCRB); 17x31 (OCRA);
17x31(OCRB); 18x30 (Courier); 20x40 (Courier); 25x41
(Bold Prestige); 25x49 (Script); 30x52 (OCRB); 46x91
(Orator)
FGL Resident Bar Codes:
Code 39, Interleaved 2 of 5, EAN 13, EAN 8, UPC,
USS-CODABAR, & Code 128 B & C with optional
human readable interpretation line.
FGL Graphics:
Dot addressable graphics; box and line drawing commands;
downloadable fonts and logos; PCX file support; PCX image
rotation (0, 90, 180, 270 degrees) and multiplication.
Printer Firmware Options:
The print characteristics (fonts, bar-codes etc) noted on this data sheet refer
to the standard firmware version. This firmware “emulates” the commonly
used Ticket Programming Language (Boca’s FGL).
Alternate Firmware Versions:
The ‘’G” version firmware is Windows® WYSIWYG Printer Drive
Function. Printer’s firmware can be updated over the Data Interface. Also,
the “G” firmware permits the ITX printers to emulate of the GTX ticket
printers.
Print Width:
1.89" (48.0mm)
(384 dots)
ITX 2002
3.15" (80.0mm)
(640 dots)
ITX 2003
1.92" (48.8mm)
(576 dots)
ITX 3002
3.20" (81.3mm)
(960 dots)
ITX 3003
3.86" (98.0mm)
(784 dots)
ITX 2004A/AS
3.89" (98.8mm)
(1168 dots)
ITX 3004A/AS
Print Length:
10.9
"
(276.9mm) Max.
Paper Width:
2.00" + / - .015"
(50.8mm)
ITX 2002/3002
3.25" + / - .015"
(82.6mm)
ITX 2003/3003
2.00"- 3.25" +/-.015" (50.8 - 82.6mm)
ITX 2003A/3003A
2.00"- 4.00" +/-.015" (50.8 –101.6mm)
ITX 2004A/AS / 3004A/AS
Ticket Length:
2.0
"
(50.8mm) Min.
Paper Type:
Thermal Tag Stock
Paper Caliper:
0.004
"
- 0.0075" (0.1- 0.19mm) typical
Paper Feed:
Friction
Data Interface (Plug-in Option Modules):
Parallel IEEE-1284
(Bi-Directional)
Serial
RS-232 (Busy & XON/OFF to 57.6K Baud)
(Not supported with “G” firmware)
USB Full Speed V2.0 Compliant
Special Purpose I/O:
8 Pin Mini-Din Connector for Low Paper & Auxiliary Power Driver.
Interface Cable:
IEEE-1284 A-B Cable
(DB25M/C36M
)
RS-232 Cable
(DB9M/DB9F)
USB A-B Cable
(A/B)
Cutter:
Life
:
2x10
6
cuts (typical) ,
1x10
6
cuts (min.)
Cut Cycle Time: 300mSec
Power Requirements:
24 VDC, 60 W max average, provided by PS60-14 universal
input power supply 90-264VAC, 47/63 Hz, 1.6 A Max.
Regulatory Compliance
CE Mark: Compliant
Safety:
ANSI/UL 60950 3
rd
Edition
CAN/CSA
C22.2
NO.
60950-00
CENELEC EN 60950: 1992
CB SCHEME: Compliant
Consult factory for Countries listed.
EMI/EMC:
FCC Part 15 Class A
CENELEC
EN
55024:1998,
EN 55022 Class B
Environment:
Temperature
:
Operating: +5 to +40
O
C
Storage: -5 to +65
O
C
Humidity
:
20-85% relative, non-condensing
User Switches:
Power On/Off, Select (F0), Test (F1),
Line Feed (F2) & Form Feed (F3)
Indicators:
Power/Paper (green LED), Ready (green LED) Attention/Error
(amber LED), Audio Beeper
Ticket Delivery Options:
uITX Desktop Models: with cutter & ejector (the ticket is ejected after
cutting) or with tearbar (no cutter installed).
pITX Countertop Models: with cutter & stacker (the ticket is stacked and
held after cutting) or with tearbar (no cutter installed). The pITX
adjustable models “A” and “AS” come with tearbar only.
eITX Desktop Models: with cutter & ejector (the ticket is ejected after
cutting).
kITX Kisok Models: with cutter & ejector (the ticket is ejected after cutting).
Setup Parameters:
All optional control features can be changed by user-friendly
switch panel entry.
Printer Status:
Printer status information such as Low Paper, Out of Paper,
Ticket Count, and System Errors are available to the host PC
via IEEE-1284, USB or Serial RS-232 reverse channel communication.
Download Memory:
512K Flash Standard for storage of user Fonts and Logos,
expandable to 1.5 Meg (Special Factory Order)
Print Image Memory:
1 or ½ Meg. Byte depending on configuration.
Maintenance:
Modular design for easy component replacement.
Page 61 of 82 Date: 4/27/05