ITX 3000/2000 Printer User Manual
(UMITX315.PDF
)
Page 39 of 82 Date: 4/27/05
stock with non-standard placement of the registration mark. The range of available adjustment is from 3.8" to 6.8" (96.5 mm to
172.7 mm).
9.3.5
Cutting Behind the Perforation
Cutting on the perforation is not recommended. The correct cut position is approximately 1/16” behind the perforation. When
this position is correctly set, the ticket emerges with the perforation at the trailing edge and with 1/16” of material attached to
the perforation. Although cutting directly on the perforation can often be successful, occasional incomplete cuts may occur.
This incomplete cut is due to the paper folding at the perforation and preventing the normal shearing action of the cutting
blades. Incomplete cuts can cause jams.