ITX 3000/2000 Printer User Manual
(UMITX315.PDF
)
Page 17 of 82 Date: 4/27/05
4
OPERATOR CONTROLS and INDICATORS
4.1
Rear I/O Panel
The following items are located on the rear panel: the power switch, power input connector, auxiliary I/O cable connector and
the installed data interface connector module (Parallel shown). The power switch in combination with holding one or more of
the switch and display panel switches provides entry into special set-up menus or diagnostic programs. The Aux I/O socket is
for connecting a low-paper sensor from an external ticket stock supply.
4.1.1
Data Interface Module Details
Shown below are the 3 interface modules available for the ITX printers.
Note: The RS232 Serial is NOT supported on the “G”
firmware printers. It is only for FGL firmware printers.
4.1.1a
4.1.1b
4.1.1c