23
(b) DC Linear Voltage Module
(c) DC Linear Current Module
The DC Linear Module, shown in Figure 9.8 below, is factory configured for either Current or Voltage output and is supported
by OP5 only. The DC Current Module can be configured to output either 0-20 mA or 4-20 mA by appropriate parameter
settings. Similarly, the DC Voltage Module can be configured to output either 0-5 V or 0-10 V by appropriate parameter
settings.
DC Voltage/Current Module
Figure 9.8
Serial Communication Plug-in Module
The 8-Pin Male Plug for mounting the Serial Communication Module is located on the Power-supply PCB, as shown in the
Figure 9.9 below. The Serial Communication Module is provided with an 8-Pin female sockets on the bottom side for the
mounting purpose. To plug (or unplug) the module simply insert (or remove) the socket into (or from) the plug.
Figure 9.9
Mounting Serial Communication
User Manual
neuro 100EX
Serial Communication
Module
Power-Supply
PCB
8 Pin Male Plug
8 Pin Female
Socket
