14
SUPERVISORY PARAMETERS
The supervisory level responsibilities include exercising control over operator, making process related decisions and
controlling the availability of process data for remote use. The
PAGE-13
parameters allow implementation of supervisory level
decisions. The Table 7.1 below lists supervisory parameters.
Table 7.1
BAUD RATE
Communication speed in ‘Bits per Second’. Set the value to match
with the host baud rate.
PASSWORD FOR RESETTING
PV HIGH-LOW
This parameter allows protection against inadvertent resetting of
Min/Max values. That is, the reset command is executed only if the
operator enters the password that matches with this parameter
value.
Settings
(Default Value)
Parameter Description
This parameter enables or disables the PV monitoring for Min /
Max values. Set to ‘Yes’ for enabling the feature.
PROCESS VALUE HIGH-LOW MONITORING
Supervisory permission for enabling recorder (retransmission)
output.
RECORDER
Supervisory permission for Alarm setpoint adjustments on
Operator Page. Set to ‘Enable’ for permission.
ALARM SP ADJUSTMENT
ON OPERATOR PAGE
Supervisory permission for use of the rear panel terminals for
connecting remote switch for Alarm acknowledge.
REMOTE ACKNOWLEDGE SWITCH
Enable
Disable
(Default : Disable)
Yes
No
(Default : No)
0 to 250
(Default : 0)
4800
9600
19200
38400
57600
(Default : 9.6)
Enable
Disable
(Default : Disable)
Enable
Disable
(Default : Disable)
User Manual
neuro 100EX
Section 7
