Service center of POWTRAN technology company
My future ,drive and control
12. Frequency setting by current analog input 0~20mA (AI2)
Parameters setting
F0.11
command source selection
1:Terminal command channel (LED ON)
1
F0.03
frequency setting source selection
2:AI2 analog signal input
3
F1.00
DI1 function selection
1.Forward running direction
1
F1.11
Terminal command mode
1.two line control mode 2
1
JP4 jumper is setting for AI2 for
receiving current analog signal.
If the analog input is 4~20mA ,you
need set extra parameter F1.16=2
(for AI2).