Chapter 4 Panel and the keyboard display and operation
ADSD-S-S
29
Chapter 4 Panel and the keyboard display and operation
This chapter describes ADSD-S-S servo drive panel display and basic operation.
4-1 Panel display and operation
4-1-1 Parts of the panel
The panel is consists of 5 LED digital tube display and the 4 buttons
、
、
、
and
two of LED lights, used to display all kinds of system condition, setting parameters, etc. Operation is
layered operation, from the main menu on step by step.
type
designation
function
POW
Main power lamp
Light: the power is on
Damp: the power is off
RUN Run
lamp
Light: the servo drive is working.
Damp: the servo drive is not working.
Up keys
Increase the serial number or value; Long
press has repeated effect
Down keys
Reduce the serial number or value
；
Long
press has repeated effect
Exit keys
Menu exit
；
Operation canceled.
Confirmed keys Menu into
；
Operation confirmed.
4-1-2 Numerical display
Numerical with five of digital tube display
，
minus signs displayed front numerical means
negative
，
if it is five negative
，
that all of the decimal point light means negative. Before some show
project has prefix characters, if the numerical digits too long need to take up the position of the
prefix characters
，
that only show the value not the prefix characters .
Main power lamp
Run lamp
Numerical display
Down keys
Up keys
Exit keys
Confirmed keys
Chapter 4 Panel and keyboard display and operation
ADSD-S-S
30
4-1-3 Parameter setting description
LED display
Description
12345
，
Said the numerical display
positive
-1234
，
Said within four negative, front
showed a negative sign
1.2.3.4.5.Said five negative, all the decimal
point light said negative.
4-2 Main menu.
The first levelr is the main menu, there are four kinds of operating mode, Use
、
key to
change the mode. Use
key into the layer 2, perform detailed operation, use
key to back form
layer 2 to the main menu.
Stateful
Inspection
Parameter
Setting
Parameter
Manager
Miscellaneous
Function
Layer 2
First Floor
（Main Menu）
4-3 State monitoring
In the main menu choice state monitoring “F- ”, press
key into the monitoring
mode. There are a variety of surveillance program, user press
、
key to choose show the
