1--4
Powerware BPIV Parallel Cabinet Installation and Operation
164201409 REV. B
101503
CAUTION:
Do not tilt cabinets more than 10 degrees from vertical.
3.
Set the pallet on a firm, level surface, allowing a minimum clearance of
3 m (10 ft) on each side for removing the cabinet from the pallet.
4.
Remove the protective covering from the cabinet.
5.
Remove the packing material, and discard or recycle them in a responsible
manner.
6.
After removing the protective covering, inspect the contents for any evidence
of physical damage, and compare each item with the Bill of Lading. If damage
has occurred or shortages are evident, contact the Powerware Customer
Service Department immediately to determine the extent of the damage and its
impact upon further installation.
NOTE:
While awaiting installation, protect the unpacked Parallel cabinet from
moisture, dust, and other harmful contaminants. Failure to store and
protect the Parallel cabinet properly may invalidate the warranty.
