PowerWalker VI 1000RT/LE, Manual

Page: 5 / 23

EN
EN
–
EN
1. INTRODUCTION
1.1 General Introduction
This series UPS is pure sine wave line interactive uninterruptible power
system with compact design, and it is designed for critical application and
environment, such as desktops, servers, workstations, and other networking
equipments. The capacity range is available for 1000VA, and 1500VA. This
series protects your sensitive electronic equipments against power problems
including power sags, spike, brownouts, line noise, and blackouts.
This series is powered from the AC mains and supply also AC power backup.
Communication and control to the unit is available through serial or USB
ports located on the rear panel. The serial port will support communications
directly with a server. The communications protocol for the serial ports shall
conform to true RS232 interface.
This series is designed with outstanding performance and reliability. The
unique features include the following:

Microprocessor control guarantees high reliability

High frequency design

Built-in boost and buck AVR

User replaceable design for 1000VA /1500VA models

Selectable output range and line sensitive

Cold startup capability

Built-in Dry contact/RS-232/USB communication port

Overload, Short-circuit, and overheat protection

Rack/Tower 2 in 1 Design for 1000VA/1500VA models

Network Transient Protector guards your network communications
equipment from surges.