4.3 Network Transient Protector
The Network Transient Protector is located on the rear panel and has jacks
labeled IN and OUT. Please connect the input connector of the equipment
you are protecting to the jack labeled OUT, and connect the network cable to
the jack labeled IN.
5. BATTERY REPLACEMENT
5.1 1000VA/1500VA models
Follow the steps and charts below to replace batteries for 1000/1500VA
models:
1. Remove the battery door front panel by pulling on both ends.
2. Unscrew the battery plate from UPS.
3. Disconnect the
RED
battery cable.
Summary of Contents for VI 1000RT/LE
Page 2: ......
