PowerWalker VFI 10000TCP 3/1, Manual

Page: 29 / 135

26
The UPS provides useful information about UPS itself, load status, events,
measurements, identification, and settings through the front panel display.
After powering on, the LCD will display the “WELCOME” logo for several
seconds and then enter to the default page which shows the UPS status
summary. The display automatically returns to the default UPS status
summary screen when no button has been pressed within 15 minutes.
On the UPS status summary screen it provides the following information:

Status summary, including mode and load

Alarm status, if any are present
Notes: alarm including fault and warning information

Battery and charger status, including battery voltage, charger
level and charger status

Running information including parallel UPS and running time
Fig. 5-2 The default LCD display
The more detailed operation of LCD is illustrated in the chapter of 5.4.