PowerTrunk HTT-500-2 User Manual Download Page 2 | Manualshive

Page: 2 / 173

background image

Original Instructions: ENGLISH
Document Number: PD-UG-0010
Issue 1.2

Copyright

© PowerTrunk, Inc. 2002–2016. All rights reserved.
No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by
any means to any other party without prior written permission of Teltronic S.A.U. and/or PowerTrunk Inc. The distribution
of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A.U. and/or PowerTrunk
Inc. and the receiver.
Please also note that part of these contents even may be covered by patent rights.
This document, the referred documents and the described product are considered protected by copyright according to the
applicable laws.
PowerTrunk and the PowerTrunk logo are registered trademarks of Teltronic S.A.U.

Disclaimer

Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other
referred document, this should not be construed as a commitment on the part of Teltronic S.A.U. and/or PowerTrunk Inc.,
and the liability of Teltronic S.A.U. and/or PowerTrunk Inc. for any errors and omissions shall be limited to the correction
of such errors and omissions. Teltronic S.A.U. and/or PowerTrunk Inc. welcomes any comment as a way to improve any
delivered documentation. The information contained herein has been prepared for the use of appropriately trained
personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or
relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A.U. and/or
PowerTrunk Inc. be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or
arising out of the use of this information. The information or statements given in these documents regarding the suitability,
capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined
in the agreement made between Teltronic S.A.U. and/or PowerTrunk Inc. and the customer. Teltronic S.A.U. and/or
PowerTrunk Inc. reserves the right to revise these documents and to make changes to its content at any time, without prior
notification.

Software license agreement

NOTICE: CAREFULLY READ THE LEGAL AGREEMENT CORRESPONDING TO THE LICENSE YOU PURCHASED,
WHICH SETS FORTH THE GENERAL TERMS AND CONDITIONS FOR THE USE OF THE LICENSED SOFTWARE.

Contact Details

PowerTrunk, Inc.
66 York Street Jersey City
NJ 07302
U.S.A.
T: +1 201 630 4520
F: +1 201 630 4522

ii

HTT-500-2 – 12/2016

«
1
2
3
4
...
»

Summary of Contents for HTT-500-2














































































































































































Reviews:

No comments

Related manuals for HTT-500-2

Brand: I MUST SCREAM Pages: 15

Brand: GOWIN Pages: 2

Brand: GENTRON Pages: 28

Brand: Powermate Pages: 12

Brand: GPX Pages: 2

Brand: Radio Shack Pages: 16

powerstation go AC

Brand: Mophie Pages: 17

Nite Lite V Series

Brand: Allmand Pages: 17

Brand: Extron electronics Pages: 32

Brand: Porter-Cable Pages: 24

Brand: Westerbeke Pages: 95

Brand: Raymarine Pages: 2

Brand: Chevron Pages: 26

Brand: Teac Pages: 25

Brand: Atlas Copco Pages: 68

Brand: Winco Pages: 12

Brand: Audio Pro Pages: 53

Brand: Denver Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands