Operating Modes
Your radio supports the following operating modes:
In
Trunked Mode Operation
(TMO Mode) your radio operates on the
network infrastructure supplied by your service provider.
In
Direct Mode Operation
(DMO Mode) your radio can transmit directly
to another radio (antenna to antenna). In DMO mode radio coverage
depends on the position of the caller and the receiving radio. When you
switch to DMO your radio leaves the network and tunes to the selected
DMO talkgroup. See also
In
Repeater
mode your radio enables two or more radios operating in
DMO mode to communicate over an extended range, automatically
relaying voice and messages by operating as a repeater. See also
.
In
P25 Mutual Aid
mode (P25 Mode) your radio communicates on one
channel at a basic level with the emergency services in the event of a major
incident. See also
When you are in P25 Mutual Aid mode, you can select
Tetra Mode
to
return to full TETRA radio operation.
To change operating mode from the Home screen
Press the
Menu
context key, then select
Networks > Operating Mode
. Scroll
to the mode (highlight it) and press
Select
.
Alternatively, a soft key may be programmed as a shortcut to this function or
a shortcut may be added to the Shortcut Bar. Open the Shortcut Bar (in the
Home screen press the
Shortcut
context key), scroll to the
Operating Modes
shortcut and then press the
Select
context key. You can then select the
operating mode.
98
HTT-500-2 – 12/2016
