PowerBoss apex 47 g Instruction Manual Download Page 8

Page: 8 / 64

1.3

Labels at the Machine

The following safety and information
signs are legibly attached to the
machine. Missing or illegible stickers
have to be replaced.

Folding apron (1)

Parking brake (2)

Nameplate, front and rear (3)

Inflation pressure (4)

Read and observe operator's

Manual (5)

Ignition lock (6)

Brake (7)

Noise performance (8)

91 dB (A) Apex 4

Safety Information

Fig.1

1.3

Labels at the Machine

The following safety and information
signs are legibly attached to the
machine. Missing or illegible stickers
have to be replaced.

Folding apron (1)

Parking brake (2)

Nameplate, front and rear (3)

Inflation pressure (4)

Read and observe operator's

Manual (5)

Ignition lock (6)

Brake (7)

Noise performance (8)

91 dB (A) Apex 49 G

91 dB (A) Apex 49 GH

Safety Information

Fig.1

Summary of Contents for apex 47 g

































































Search results

Summary of Contents for apex 47 g

Reviews:

Related manuals for apex 47 g

Brands by name

Popular brands

PowerBoss apex 47 g, Instruction Manual

Search results

Summary of Contents for apex 47 g

Reviews:

Related manuals for apex 47 g

Brands by name

Popular brands