PowerBoss apex 47 g, Instruction Manual

Page: 53 / 64

6.11.1 Replace Cylinder Broom V-Belt
- Turn engine off and pull key.
- Secure machine by engaging
parking brake.
- Remove bottom right fairing (turn
locks counter-clockwise by square
spanner).
- Detent tensioning spring (Fig. 29/15)
by left hand while taking the V-belt
off the tensioning roller with right
hand.
- Remove V-belt (Fig. 29/13).
Proceed in inverse order for mounting.
6.11.2 Replace Side Brush V-Belt
- Turn engine off and pull key.
- Secure machine by engaging par-
king brake
- Remove bottom right cover (turn
locks counter-clockwise by square
spanner).
- Remove cylinder broom V-belt (as
described in paragraph "Replace
Cylinder Broom V-Belt")
- Loosen screws (Fig. 29/10) at the
cover plate and remove
- Remove cover plate
- Push side brush from the front side
in direction of the machine to detent
V-belt (Fig. 29/11)
- Remove V-belt (Fig. 29/11)
Proceed in inverse order for mounting.
6.11.3 Replace Suction Fan V-Belt
- Turn engine off and pull key.
- Secure machine by engaging par-
king brake
- Open seat hood
- Loosen hexagon nuts (Fig. 29/6)
and remove together with belt guide
(Fig. 29/5)
- Detent V-belt (Fig. 29/7) with tensio-
ning roller lever (Fig. 29/19) and ta-
ke from the belt pulley
- Loosen tensioning roller (Fig. 29/2)
and detent the V-belt, and then re-
move.
.
Proceed in inverse order for mounting.
53
Maintenance/Service
6.11.1 Replace Cylinder Broom V-Belt
- Turn engine off and pull key.
- Secure machine by engaging
parking brake.
- Remove bottom right fairing (turn
locks counter-clockwise by square
spanner).
- Detent tensioning spring (Fig. 29/15)
by left hand while taking the V-belt
off the tensioning roller with right
hand.
- Remove V-belt (Fig. 29/13).
Proceed in inverse order for mounting.
6.11.2 Replace Side Brush V-Belt
- Turn engine off and pull key.
- Secure machine by engaging par-
king brake
- Remove bottom right cover (turn
locks counter-clockwise by square
spanner).
- Remove cylinder broom V-belt (as
described in paragraph "Replace
Cylinder Broom V-Belt")
- Loosen screws (Fig. 29/10) at the
cover plate and remove
- Remove cover plate
- Push side brush from the front side
in direction of the machine to detent
V-belt (Fig. 29/11)
- Remove V-belt (Fig. 29/11)
Proceed in inverse order for mounting.
6.11.3 Replace Suction Fan V-Belt
- Turn engine off and pull key.
- Secure machine by engaging par-
king brake
- Open seat hood
- Loosen hexagon nuts (Fig. 29/6)
and remove together with belt guide
(Fig. 29/5)
- Detent V-belt (Fig. 29/7) with tensio-
ning roller lever (Fig. 29/19) and ta-
ke from the belt pulley
- Loosen tensioning roller (Fig. 29/2)
and detent the V-belt, and then re-
move.
.
Proceed in inverse order for mounting.
53
Maintenance/Service