PowerBoss apex 47 g, Instruction Manual, Page: 50 / 64

6.10.1 Check Hydraulic Fluid Level
- Turn engine off and pull key.
- Secure machine by engaging par-
king brake.
- Open seat hood.
- Unscrew cap with dipstick
(Fig. 27/1)
- Wipe dipstick by means of cloth
- Screw cap until stop
- Unscrew cap with dipstick and
check hydraulic fluid level, refill if re-
quired
6.10.2 Refill Hydraulic Fluid
- Unscrew cap with dipstick and
check hydraulic fluid level according
to paragraph 6.10.1.
- Use appropriate oil-resistant reci-
pient with mouth or funnel for refil-
ling
- Proceed to check of fluid level after
refilling
Hydraulic fluid filter
1 Filler neck
2 Hydraulic oil filter
- Filling is sufficient if the bottom end
of the dipstick immerges into the flu-
id for approx. 5mm.
6.10.3 Change Hydraulic Fluid Filter
The hydraulic fluid filter is located in
the pump line and equipped with a
bypass valve in order to guarantee
fluid supply of the travel drive assem-
bly even if the fluid filter is soiled.
Change the fluid filter after the first
100 hours of operation.
- Turn hydraulic fluid filter (Fig. 27/2)
counter-clockwise to loosen it and
unscrew
- Before screwing new filter, fill it
with oil
- Ride the machine a short distance
- Refill sufficient hydraulic fluid
- Check fluid filling level
Hydraulic fluid: Mobil DTE 15 M
or a fluid of similar quality.
50
Maintenance/Service
Fig.27
6.10.1 Check Hydraulic Fluid Level
- Turn engine off and pull key.
- Secure machine by engaging par-
king brake.
- Open seat hood.
- Unscrew cap with dipstick
(Fig. 27/1)
- Wipe dipstick by means of cloth
- Screw cap until stop
- Unscrew cap with dipstick and
check hydraulic fluid level, refill if re-
quired
6.10.2 Refill Hydraulic Fluid
- Unscrew cap with dipstick and
check hydraulic fluid level according
to paragraph 6.10.1.
- Use appropriate oil-resistant reci-
pient with mouth or funnel for refil-
ling
- Proceed to check of fluid level after
refilling
Hydraulic fluid filter
1 Filler neck
2 Hydraulic oil filter
- Filling is sufficient if the bottom end
of the dipstick immerges into the flu-
id for approx. 5mm.
6.10.3 Change Hydraulic Fluid Filter
The hydraulic fluid filter is located in
the pump line and equipped with a
bypass valve in order to guarantee
fluid supply of the travel drive assem-
bly even if the fluid filter is soiled.
Change the fluid filter after the first
100 hours of operation.
- Turn hydraulic fluid filter (Fig. 27/2)
counter-clockwise to loosen it and
unscrew
- Before screwing new filter, fill it
with oil
- Ride the machine a short distance
- Refill sufficient hydraulic fluid
- Check fluid filling level
Hydraulic fluid: Mobil DTE 15 M
or a fluid of similar quality.
50
Maintenance/Service
Fig.27