51
Operation
3.3
Operation
The scrubber drier can be operated on
surfaces with a gradient of 6% for max-
imally 5 minutes.
Adapt your driving style to the
local conditions (floor charac-
teristics, persons in the vicinity,
obstacles etc.).
3.3.1 Switching the vehicle on
Please read Section 1 before
switching the vehicle on.
Carry out the following steps so that the
vehicle is ready to operate:
• Disconnect the battery plug from the
charger and connect it to the vehicle.
When connecting the battery
plug to the vehicle, switch the
key switch to off (lock
position 0) beforehand.
• The vehicle is equipped with a safety
shutdown via a seat contact (dead
man's switch). This means that it is
essential for operating personnel to
be seated in the driver's seat to be
able to operate the vehicle.
• Ensure that the driving direction
switch is in its neutral setting, refer to
accelerator for driving forwards and
backwards in Section 3.2.1.
Fig. 23
• Actuate the service brake with your
foot in order to prevent accidentally
accelerating the vehicle, refer to Ser-
vice Brake in Section 3.2.1.
• Insert the key in the key switch
(Fig. 23).
• Turn the key from lock position 0 to
position 1. The vehicle is ready to op-
erate.
