PowerBoss Admiral 40D, Instruction Manual

Page: 101 / 112

101
Maintenance and Service
Disassembling the panel air filter
Fig. 37
1 Filter case cover with agitating
motor
2 Filter element (panel air filter)
1. Open the front flap to the front.
The engine must have stopped
before opening the front flap.
Risk of injury!
2. Remove the straps holding the filter
case cover (Fig. 37/1).
3. Remove the filter case cover
(Fig. 37/1).
4. Remove the panel air filter
(Fig. 37/2).
Cleaning the panel air filter
thoroughly
Do not inhale dusts. Health
hazard! Always wear an appro-
priate dust mask.
Drop the panel air filter (Fig. 37/2) a few
times, from a suitable height, onto a sol-
id surface. Ensure the filter ribs are not
damaged!
The surface must not have any
irregularities. Do not let the
panel air filter (Fig. 37/2) drop
at a slant.
Do not install panel air filters
(Fig. 37/2) which have dam-
aged filter ribs!
Installing the panel air filter
The panel air filter (Fig. 37/2) must be
installed in the reverse sequence to dis-
assembly, refer to Section “Disassem-
bling the panel air filter”.
To not insert the panel air filter
(Fig. 37/2) the wrong way
round! Pay attention to the ar-
row on the frame of the panel
air filter (Fig. 37/2)! The arrow
must point upwards.
1
2