background image

Getting the most out of your machine

Quickstart Guide

VCSD-01/VCSD-02

Scrubber dryer

VCSD-01/VCSD-02

1) Getting started

2) How to use

Release the handle bar by depressing the handle 

release pedal (A).

Turn the machine on and select the 

required setting. 

A =  on/off switch (mains powered 

 

unit only)

B =  suction motor on/off switch

C =  water flow on/off switch

D =  brush motor on/off switch

Disconnect the recovery hose, remove the orange dirty 

water tank, plug the charger into the battery then replace 

the tank. The unit needs to be plugged in and charged for 

4 hours before use until the green LED is displayed.

Fill machine - Pour recommended amount of cleaning 

solution into the opening as shown, and top with water 

to maximum fill level (max temp of 50°C).

To lift or lower 

the squeegee 

use the lever  

as indicated.

Connect main 

isolator key  

(battery  

version only).

Place scrubber 

pad on the floor 

and lift pad 

holder over the 

pad to fix to the 

machine.

To activate brushes, pull control 

lever towards handle.

Rotate the isolation key on the back 

of the unit anti-clockwise to isolate 

all power. The key can now be 

removed from the unit. 

Insert the key and fully rotate 

clockwise to provide power for 

all functions. The key cannot be 

removed in this position.

Open and 

adjust the clean 

solution water 

tap to adjust 

flow of water.

Connect the recovery hose located on the back of the 

machine to the dirty water tank. 

VCSD-01_VCSD-02_QSG_A5_[J1831]_Amd_11.07.13_2.indd   1

11/07/2013   17:03

Reviews: