34
Table 5-3 Status Summary Screens
Status Summary Screen
Description
Fig 5-3
Normal mode:
The UPS is operating in Normal mode
from utility power.
Fig 5-4
Battery mode:
When the UPS is running in battery
mode, the buzzer beeps once every 4
seconds.
Fig 5-5
Bypass with output:
The UPS does not have the backup
function when it is in bypass mode.
The power used by the load is supplied
from the utility power via internal filter.
The UPS will beep once every 2
minutes in bypass mode.
Fig 5-6
Bypass without output:
The UPS in bypass mode without
output
Fig 5-7
High Efficiency Mode:
After the UPS is turned on, the power
used by the load is supplied from the
utility power via internal filter while the
utility power is in normal range, so the
high efficiency could be gained in the
HE mode. Once the mains is loss or
abnormal, the UPS would transfer to
Line mode or Battery mode and the
load is supplied continuously.
1) The function could be enabled
through the LCD setting or the
Summary of Contents for VFI 10000P/RT LCD
