Installation and operating manual
Page 56 of 95
(PVI-3.8/4.6-I-OUTD Rev.: 1.5)
If the system is grounded (one of the two poles is connected to the ground) the first
screens will be as follows
If instead, the system is ungrounded (neither of the two poles is connected to the
ground), the first screen will be as follows:
After the first control, the following screens will alternate between them
The grid voltage and frequency values will be displayed along with information
regarding whether they are inside or outside the range, until the connection is made
When connected, a beep will sound from the buzzer and from this point, the screens
will show the measurements, as described in paragraph 5.5.3.
Control grid:
30
sec
GND ISO SELFTEST
RUN … Vgnd 130V
GND ISO SELFTEST
OK Vgnd 130V
V grid
223.8 V
OK
Fgrid
50.17 Hz
OK
Connection
........................
Summary of Contents for Aurora PVI-3.8/4.6-I-OUTD
Page 96: ......
