Power One AURORA MICRO-0.25-I-OUTD-US-208/240, Manual, Page: 63 / 78

Page
62
of
76 MICRO-0.25/0.3-I-OUTD-US-208/240 BCG.00612_AB
Part
6 Maintenance Guide
6.2 STORAGE AND DISMANTLING
6.2.1 S
TORAGE OF THE
E
QUIPMENT OR
P
ROLONGED
S
TOP
If the equipment is not used immediately or is stored for long periods, check that it is correctly
packed. The equipment must be stored in well-ventilated indoor areas that do not have
characteristics that might damage the components of the equipment.
Restarting after a long or prolonged stop requires a check and, in some cases, the removal of
oxidation and dust that will also have settled inside the equipment if not suitably protected.
6.2.2 D
ISMANTLING
, D
ECOMMISSIONING AND
D
ISPOSAL
Power-One CANNOT be held responsible for disposal of the equipment: displays, cables, batteries,
accumulators, etc.; therefore, the customer must dispose of these substances, which are potentially
harmful to the environment, in accordance with the regulations in force in the country of
installation.
If the equipment is dismantled, you must adhere to the regulations in force in the country of
destination, and in any case avoid causing any kind of pollution in order to dispose of the products
listed below.
Table 6- 2: Disposal of Components
Dispose of the various types of materials that the parts of the equipment consist of in dumps
that are suitable for the purpose.