Power One AURORA MICRO-0.25-I-OUTD-US-208/240, Manual, Page: 62 / 78

Page
61
of
76 MICRO-0.25/0.3-I-OUTD-US-208/240 BCG.00612_AB
Part
6 Maintenance Guide
Table 6- 1: Routine Maintenance
Do not attempt to dismantle the equipment or make any internal repairs!
With a view to preserving the integrity of their safety and insulation, AURORA
MICRO inverters are not designed to allow internal repairs.
The AC output wiring harness (AC drop cable on the MICRO inverter) cannot be
replaced. If the cord is damaged the equipment should be scrapped.
Any maintenance or replacement of the device
could require dismounting the photovoltaic
module mounted on top of the MICRO inverter.
This condition must be accounted for during
installation, ensuring that the safety distances
are correct for normal control and
maintenance operations.