Power One AURORA MICRO-0.25-I-OUTD-US-208/240, Manual, Page: 23 / 78

Page
22
of
76 MICRO-0.25/0.3-I-OUTD-US-208/240 BCG.00612_AB
Part
2 Unpack and Select Installation Location
2.1 GENERAL CONDITIONS
Some specifications are not applicable to small equipment or components.
2.1.1 T
RANSPORT AND
H
ANDLING
Transportation of the equipment, especially by road, must be carried out by suitable ways and
means for protecting the components (in particular, the electronic components) from violent
shocks, humidity, vibration, etc.
Power-One packages and protects individual components using suitable means to make its
transport and subsequent handling easier.
Discard packaging elements immediately as to not cause unforeseen injury. Packaging elements
(cardboard, cellophane, staples, adhesive, tape, straps, etc.) may cause cuts and/or injuries if not
handled with care. They should be removed by suitable means and disposed of in accordance with
any regulations enforced by the country of installation.
2.1.2 I
NCOMING
I
NSPECTION
It is the customer’s responsibility to examine the condition of the unit shipped. Upon receipt of
Power-One’s AURORA Inverter, please perform the following check:
•
Inspect the shipping container for any external damage.
•
Inventory the contents against list below; verify receipt of all items. Use care not to discard
any equipment, parts, or manuals.
• Call the delivering carrier if damage or shortage is detected.
If inspection reveals damage to the inverter, contact the supplier, or authorized distributor for a
repair/return determination and instructions regarding the process.