Power One AURORA MICRO-0.25-I-OUTD-US-208/240, Manual, Page: 20 / 78

Page
19
of
76 MICRO-0.25/0.3-I-OUTD-US-208/240 BCG.00612_AB
Part
1 Introduction and Safety
1.2.1 O
THER
L
ABELS
In addition to the safety label and product nameplate,there is one identification label on the
inverter. A duplicate label is attached in a plastic bag as shown below and will be used later to fill in
the “system map” for the monitoring software. It is recommended to make a copy of the “system
map” for the installer.
Figure 1-2: Identification label for adhering to system map