6,500W Remote Start Generator
Visit www.princessauto.com for more information
5
8254187
V 3.03
7. Unstable gait (stumbling around)
8. Nausea & vomiting
9. Unconsciousness
10. Flu-like symptoms
NOTE: As a precaution, install a carbon monoxide detector in a work area that has
gasoline-powered equipment.
ELECTRICAL SAFETY
1. Disconnect the tool from the power supply when not in use, and before cleaning, servicing,
or changing any parts or accessories.
2. Protect yourself against electrical shocks when working on electric equipment. Avoid body
contact with grounded surfaces such as pipes, radiators, cooking stoves, and refrigerators.
There is an increased chance of electrical shock if your body is grounded.
3. Double insulated tools are equipped with a polarized plug (one blade is wider than the other).
This plug will fit in a polarized outlet only one way. If the plug does not fully fit in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized
outlet. Do not change the plug in any way. Double insulation eliminates the need for a three-
wire grounded power cord and grounded power supply system.
4. Grounded tools must be plugged into an outlet that is properly installed and grounded in
accordance with all codes and ordinances. Never remove the grounding prong or modify the
plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in
doubt about an outlet being properly grounded. If the tool should electronically malfunction
or break down, grounding provides a low resistance path to carry electricity away from
the user.
5. Do not abuse the cord. Never use the cord to carry tools or to pull the plug from an outlet.
Keep the cord away from heat, oil, sharp edges, or moving parts. Do not operate this tool if
the power cord is frayed or damaged. Immediately replace damaged cords. Damaged cords
increase the risk of electrical shock. Do not modify the plug in any way.
6. When operating a power tool outside, use an outdoor extension cord marked “W-A” or
“W”. These cords are rated for outdoor use and reduce the risk of electrical shock. Use in
conjunction with a Ground Fault Circuit Interrupter (GFCI). If operating a power tool in a
damp location is unavoidable, the use of a GFCI reduces the risk of electrical shock. It is
recommended that the GFCI should have a rated residual current of 30 mA or less.
7. Avoid using an unnecessarily long extension cord. Choose a cord that is appropriate for the
situation. A cord that is too long and is running across the floor can be more dangerous
than helpful. Using a cord that is too long or too thin could damage the tool. Unroll the cord
completely to prevent it from overheating.
8. Place the electrical cord in a position that prevents it from coming into contact with the tool
and from getting caught by the work piece. The cord should always stay behind the tool.
