6,500W Remote Start Generator
12
For technical questions call: 1-800-665-8685
V 3.03
8254187
STARTING THE ENGINE / STOPPING THE ENGINE
STARTING THE ENGINE
1. Make sure that the AC circuit breaker is in the OFF position. The generator may be difficult to
start if an appliance is connected.
2. Turn the fuel valve lever to the ON position.
3. Move the engine switch to the ON position.
4. Lightly pull the starter grip until resistance is felt, and then pull briskly.
CAUTION: Do not allow the starter grip to snap back against the engine. Return the starter cord
gently to prevent damage to the starter housing.
STOPPING THE ENGINE
In An Emergency
To stop the generator in an emergency, turn the engine switch to the O (OFF) position.
During Normal Use
1. Turn the AC circuit breaker to the OFF position.
2. Turn the engine switch to the O (OFF) position.
3. Turn the fuel valve lever to the OFF position.
CONNECTING ELECTRICAL APPLIANCES
WARNING! Always ground the generator to the earth or to the vehicle.
WARNING! If the generator is supplying two or more loads with power, be sure to first connect the
generator with the higher starting current. Do not move the ground wire during normal maintenance
or repair.
The following table provides reference information for connecting electric appliances to the generator:
Description
Wattage
Typifier
Example
Start
Rating
Electric device
Start
Rating
Incandescent
lamp
Heating device
x1
x1
Incandescent
lamp
TV
Incandescent
lamp
100V A (W)
100V A (W)
Fluorescent
lamp
x2
x1.5
Fluorescent
lamp
40W Fluorescent
lamp
80V A (W)
60V A (W)
Drive device
x3 to 5 x2
Refrigerator
Electric fan
Refrigerator
150W
450 to 750V
A (W)
300V A (W)
Connecting methods are illustrated as follows:
WARNING! Ensure that a qualified electrician connects the generator to the home’s power supply.
An improper connection between the generator and the load may cause damage to the generator
and could also cause a fire.
