6,500W Remote Start Generator
Visit www.princessauto.com for more information
9
8254187
V 3.03
CONNECTIONS TO BUILDING ELECTRICAL SYSTEM
A qualified electrician must make the connections for standby power to a building’s electrical system.
The connection must isolate the generator power from utility power, and must comply with all
applicable laws and electrical codes. A transfer switch, which isolates generator power from utility
power, is available through an authorized service professional.
WARNING! Improper connections to a building’s electrical system can allow electrical current from
the generator to back feed into the utility lines. Such back feed may electrocute utility company
workers or others who contact the lines during a power outage, and the generator may explode,
burn, or cause fires when utility power is restored. Consult the utility company or a
qualified electrician.
GROUND TERMINAL
The generator ground terminal is connected to the frame of the generator, to the non-current-carrying
metal parts of the generator, and to the ground terminals of each receptacle. Before using the ground
terminal, consult a qualified electrician, electrical inspector, or local agency having jurisdiction over
local codes and ordinances that apply to the intended use of the generator.
