5-89
PFC-6800 • 5403602 • Rev B • 2/13
To configure points:
Click on the
1.
Points function
to display the "
Points Configuration" window
.
Example of a Configuration Window
Figure 115.
Note
: Click the columns to sort devices by the field selected, i.e.,
"Name", Alarm Verification" or "Low Temp Trouble"
.
Supervisory
•
– Designates a detector as a supervisory input instead of an alarm input.
Alarm Verification
•
– Specifies that a detector will utilize the alarm verification feature.
Low Temp Trouble
•
– Indicates that a device is below 40
̊
F.
Devices are listed by “
2.
Built-in SLC”
device addresses, followed by the NACs and I/O circuits.
Note
: Click on the “Device”
field
to sort the list by PWR Supply followed by SLCs.
To configure a single point:
Double-click in “
1.
Name
”
field
to enter a descriptive name. The current name is highlighted as shown:
enter a new name (up to 20 alphanumeric characters).
2.
Click on drop-down arrow in the
3.
“Function” field
. Select a function type from the list.
Example of Configuring a “Single” Point
Figure 116.
Continue configuring other points, as needed.
4.
