POSIFLEX DT-207 series, User Manual

Page: 8 / 20

Part 8
Please raise the UPS battery in the
UPS battery cavity for a while if it is installed
for passing the PD-201 interface cable through
the passage in the UPS battery cavity together
with the UPS battery cable to enter the
connection area as marked in the right picture.
Please pull the cables gently while installing
the PD-201 + UPS battery cover assembly
back onto the system top cover with the 3 lugs
going in first to minimize the excessive cable
length inside the battery cavity if there is
installed with the UPS battery. Connect the PD-201 cable to the COM port
settled. Settle all excessive cable length in connection area with some cable
ties then close back the cable cover.
INSTALLING PD-309/U (OPTION)
Have a qualified technician to
set a DC + 5V support to the COM port
that the PD-309 is to be connected to
according to Posiflex technical
information if it is the RS232 interface
model PD-309.
The LCD customer display PD-309 or
PD-309U can be attached to either rear corner of
bottom plate. Refer to the pictures above. Apply
the metal base plate of PD-309/U from bottom of
DT-207/208 allowing the rubber foot at that
corner of DT-207/208 to be in the circled hole.
Use the 3 attached screws to fix the metal base
plate of the PD to bottom of DT-207/208 at the
arrowed positions. Connect the interface cable to
designated COM port or any USB port.
KEYBOARD PREPARATIONS
Keytop Replacement (Keystroke Type Only)
The keystroke type keyboard is organized into 2 parts: a 4 by 4 (total
15 keys) numerical preprinted keypad area and a 4 by 6 programmable keypad
area. However, the programmable keypad allows some layout alterations by
the system integrator. Besides the standard single key installed, there are
double keys and blank keys for purchase to provide more convenient interface