character.
If the printing area width cannot be sufficiently extended within right edge of
printable area, the left margin is reduced to accommodate one character.
6. If the width set for the printing area is less than width of the image to print, the
following processing is performed only on the line in question when a bit image
data (e.g., bit image, user-defined bit image) is to be printed.
4. The printing area width is extended to the right to accommodate the full
width of the bit image within the printable area.
5. If the printing area width cannot be sufficiently extended within the right
edge of the printable area, the left margin is reduced to accommodate the
full width of the bit image.
CODES
(HEX/CONTROL):
<1D> <5C> <
nL> <nH>
/ {GS} \
nL nH
NAME:
Set relative vertical print position in page mode
FUNCTION:
Sets the relative vertical print starting position
from the current position in page mode
Printing area width according to
nL
and
nH
Left margin
Extend to right edge of one character
Printable area
Sin
One character width
Printing area width according to
nL
and
nH
Original left margin
Reduced left margin
Printable area
One character width
Command Manual - Page 55
