manualshive.com logo in svg

POSIFLEX AURASeries, Command Manual, Page: 19 / 71

Share
Download
POSIFLEX AURASeries Command Manual Download Page 19

 

 

 

EXPLANATION: 

1.  Turns underline mode on or off, based on the following values of 

n

: 

n 

Function 

0, 48 

Turns off underline mode 

1, 49 

Turns on underline mode (1-dot thick) 

2, 50 

Turns on underline mode (2-dots thick) 

2.  The printer can underline all characters (including right-side character spacing, 

user-defined character) but cannot underline the space set by {HT} and all big 
image printing. 

3.  The printer cannot underline 90

°

clockwise rotated characters and white/black 

inverted characters. 

4.  Changing the character size does not affect the current underline thickness. 
 
 
 

CODES

 

(HEX/CONTROL)

:

 <

1B

> <

32

> / {

ESC

} 

2

 

NAME:

 Select default line spacing 

FUNCTION:

  Select default line spacing 

RANGE:

 0 

≤

 

n 

≤

 255

 

EXPLANATION: 

1.  The default line spacing 1/6.75-inch (approximately 3.76 mm). 
2.  The line spacing can be set independently in text mode and in page mode. 
 
 
 

CODES 

(HEX/CONTROL)

:

 <1B> <33> <

n>

 / {ESC} 3 

n

 

NAME:

 Set line spacing 

FUNCTION:

  Sets the line spacing 

RANGE:

 0 

≤

 

n 

≤

 255

 

EXPLANATION: 

1.  The line spacing is [

n

 x vertical or horizontal motion unit] inches. 

2.  The line spacing can be set independently in text mode and in page mode. 
3.  The horizontal and vertical motion unit are specified by {GS} P. Changing the 

horizontal or vertical motion unit does not affect the current line spacing. 

4.  In text mode, the vertical motion unit 

y

 is used. 

5.  In page mode, this command functions as follows, depending on the starting 

Command Manual - Page 19 

 

 

Summary of Contents for AURASeries








































































Reviews:

No comments