manualshive.com logo in svg

POSIFLEX AURASeries, Command Manual

Share
Download
POSIFLEX AURASeries Command Manual Download Page 46

 

 

 

• The printer is reset or the power is turned off 

 
 
 

CODES 

(HEX/CONTROL):

 <1D> <28>

  <

6B

> <04> <00> <31> <51> 

<m> 

/ {GS} ( k 

pL

 

pH

 

cn

 

fn m 

<Function 181> 

NAME: 

QR Code: Print the symbol data in the symbol storage 

area

 

FUNCTION:

 

Encodes and prints the QR Code symbol data in 

the symbol storage area using the process of <Function 180>.

 

RANGE: 

pL 

= 4, 

pH = 0, cn= 49, fn=81, m = 

48

 

EXPLANATION: 

1. 

In standard mode, use this function when printer is “at the beginning of a line,” 
or “there is no data in the print buffer.” 

2. 

The symbol size that exceeds the print area cannot be printed. 

3. 

If there is any error described below in the data of the symbol storage area, it 
cannot be printed. 
• There is no data (Function 180 is not processed). 
• If the data of the symbol storage area is more than the data allowed by 
specified model and data compaction mode. (This case is an abnormal 
number of data.) 
• The four data compaction modes are listed below (in order of compaction 
rate). Automatically selects best compaction mode by the data of the symbol 
storage area. 
– Numerical mode 
– Alphanumeric mode 
– Kanji mode 
– 8-Bit Byte Mode 

4. 

The following data are added automatically by the encode processing. 
• Position Detection Patterns 
• Separators for Position Detection Patterns 
• Timing Patterns 
• Format Information 
• Version Information 
• Error Correction codewords (employs the Reed-Solomon Error Detection and 
Correction algorithm) 
• Pad codeword 
• Number of bits in Character Count Indicator 
• Mode Indicator 
• Terminator 
• Alignment Patterns (when model 2 is selected) 
• Extension Patterns (when model 1 is selected) 

5. 

Printing of symbol is not affected by print mode (emphasized, double-strike, 
underline, white/ black reverse printing, or 90° clockwise-rotated), except for 

Command Manual - Page 46 

 

 

Summary of Contents for AURASeries








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands