6 Installation and Operating Instructions
SYSTEM PROGRAMMING
The Installer code (default: 000000) can program a new Installer Code PIN
in section
[200]
and program all the system sections from
[001]
to
[005]
and
[101]
to
[104]
.
SECTION [001] CARD/CODE OPTIONS
PosiPin can function as a reader only, as a keypad only or as a combined
reader
and
keypad. Option [3] by default
When a Card/Code option is set, it may require several seconds for
the system to update the programming. The reader emits a
confirmation beep once the modification is complete.
To enter System Programming Mode:
1. Press and hold the
[
CLEAR
]
key for 4 seconds.
The reader emits a confirmation beep, the green LED illuminates and
the red LED extinguishes.
2. Enter the
[
INSTALLER
CODE
]
and press the
[
ENTER
]
key.
Reader emits a confirmation beep and the green LED flashes.
3. Enter the 3-digit
[
SECTION
]
and press the
[
ENTER
]
key.
Reader emits a confirmation beep and green LED becomes constant.
4. Enter the required
[
DATA
]
and press the
[
ENTER
]
key.
The reader emits a confirmation beep and the green LED flashes.
5.
To program another section, repeat steps 2 and 3
. To exit, press
and hold the
[
CLEAR
]
key for 4 seconds.
The reader emits a rejection beep and the green LED extinguishes.
Enter Description
[0]
Keypad and reader disabled. For programming only.
[1]
Reader only. Present valid card to the reader for Access Granted.
[2]
Keypad only. Enter valid code on the keypad for Access Granted.
[3]
Keypad and reader enabled. A user must present
BOTH
a valid
card
AND
enter a valid code to receive an Access Granted.
