PosiPin 13
DELETING A USER CODE
User Codes can be deleted individually. When the User Code is deleted, a
new card and/or PIN can be programmed in the section.
To delete User Codes:
1. Press and hold the
[
CLEAR
]
key for 4 seconds.
The reader emits a confirmation beep, the green LED illuminates and
the red LED extinguishes.
2. Enter
[
MASTER
CODE
1
or
MASTER
CODE
2]
and press the
[
ENTER
]
key.
Reader emits a confirmation beep and the red and the green LEDs
flash simultaneously.
3. Enter
[203]
and press the
[
ENTER
]
key.
Reader emits a confirmation beep and the red and the green LEDs
flash alternately.
4. Enter the section of the desired User Code. Press the
[
ENTER
]
key.
The reader emits a confirmation beep and the green LED illuminates.
If the red LED illuminates, the section is empty. If the red LED
remains extinguished, a User Code is already programmed in the
section.
5. Press the
[
CLEAR
]
key.
The red LED flashes.
6. Press the
[
ENTER
]
key to delete the section’s programming and
advance to the next section. Press the
[
CLEAR
]
key to exit the section
without deleting the programming.
7. Press and hold the
[
CLEAR
]
key for 4 seconds to exit.
