10 Installation and Operating Instructions
SECTION [104] FACE LIGHT COLOUR
The Face Light’s colour can be modified as desired. Option [0] by default.
This feature only applies when Face Light Operation programmed in
Section
[103]
is set for Option
[0]
: Face Light constant.
SECTION [200] CHANGING THE INSTALLER CODE
The Installer Code (000000 by default) is used to program all the system’s
sections, but cannot program the Master and User Codes (see page 11).
In section
[200]
enter six digits where each digit can be any value from 0 to
9.
RESETTING THE INSTALLER AND MASTER CODES TO DEFAULT
To reset the Installer Code, Master Code 1 and Master Code 2 to factory
defaults, disconnect the reader’s power supply. Press and hold the
[3]
and
[4]
keys simultaneously while re-connecting its power supply. Installer
Code, Master Code 1 and Master Code 2 are reset when the reader emits
a confirmation beep.
Enter Description
[0]
Red (for CR-R885-S) or Blue (for CR-R885-SB) Face Light
[1]
Green Face Light
