16 Installation and Operating Instructions
PANIC ALARM
A panic alarm can be generated by pressing and holding the
[
CLEAR
]
and
[
ENTER
]
keys for 2 seconds. The Panic Alarm will activate the panic output
(see page 4). Access will not be granted to users until the Panic alarm is
disarmed. Disarming a Panic Alarm depends on the Card/Code Option
(see page 6) and Access Granted Option (see page 7). To disarm a Panic
Alarm:
The second user’s card and/or User Code must be different from the
first.
Single Access
Granted
Dual Access
Granted
Dual Access Granted with
Dual Panic Disarm
Reader
Only
present 1 valid card to the
reader
2 users: each user presents a
valid card to the reader.
Keypad
Only
enter 1 valid User Code and
press the
[
ENTER
]
key
2 users: each user enters a
valid User Code and presses
the
[
ENTER
]
key.
Reader
and
Keypad
present 1 valid card to the
reader then enter 1 valid User
Code and press the
[
ENTER
]
key
2 users: the first user presents
a valid card to the reader. then
must enter a valid User Code
and press the
[
ENTER
]
key.
The second user has 30
seconds to present a valid
card to the reader and then
enter a valid User Code.
