MX5 Manual Rev. D
41
Reader / Writer, Virtual
USB
Serial output, Format
ASCII Data, SDK
DLL or a serial Protocol to Read and Write data to the S50 Mifare Memory Card. This
firmware will create a serial device attached to a Com port. Use the MX5.INF install
file to automatically install the appropriate Microsoft Drivers provided with the OS.
The MX5 setup utility when installed will provide this INF file. No additional drivers
are required. (Mifare S50, ISO-14443A) Use DLL or VRS Protocol Ver. 2.0-RFID
5C-KB-M2-UID2
Ver. 4.4 Product ID:90
I-Code2 ID# reader,
Keyboard output
Use this firmware on the MX5C with an I-Code 2 (Mifare II) 13.56 MHz RFID “M2”
Module only. The unique random serial number (UID) on the I-Code2 RFID card is
Read
automatically and typed out as if someone manually typed the number. This
firmware creates a second HID keyboard attached to the system. No special driver is
required. I-CODE2 (ISO-15693)
5C-VRS-M2-UID2
Ver. 4.0 Product ID:91
I-Code2 ID# reader, Virtual
USB Serial output, ASCII
Data
Use this firmware on the MX5C with an I-Code 2 (Mifare II) 13.56 MHz RFID “M2”
Module only. The unique random serial number (UID) on the I-Code2 RFID card is
Read
automatically and sent out directly to the virtual serial Com port. This firmware
will create a serial device attached to a Com port. Use the MX5.INF install file to
automatically install the appropriate Microsoft Drivers provided with the OS. The MX5
setup utility when installed will provide this INF file. No additional drivers are
required. I-CODE2 (ISO-15693)
