MX5 Manual Rev. D
37
53-VRS-EM-UID
Ver. 4.3 Product ID:21
Magnetic card reader with
EM ID# reader, Virtual USB
Serial output, ASCII Data
Use this firmware on the MX5C or MX53 with an EM 125 KHz RFID “EM”
Module only. The three track magnetic card
reader
option can be turned off if
desired using the setup utility. The unique random serial number on the EM
RFID card is
Read
automatically and sent out directly to the virtual serial Com
port. Magnetic card data is also sent out to the virtual serial Com port when a
magnetic card is swiped on the reader. This firmware will create a Virtual
serial device attached to a Com Port. Use the MX5.INF install file to
automatically install the appropriate Microsoft Drivers provided with the OS.
The MX5 setup utility when installed will provide this INF file. No additional
drivers are required. (EM4100, EM4102, TK4100, ISO7810)
53-HID-EM-UID
Ver. 4.2 Product ID:22
Magnetic card reader with
EM ID# reader, HID report
format output
Use this firmware on the MX53 with a 125 Khz RFID "EM" Module only. The
UID on the EM RFID card is Read automatically and sent to Track 1 of the HID
Device inMa g-Tek report format. This Report also includes Error status of each
track, data length and type of card read. The MX5 setup utility Help File has
more details on this report. Magnetic card data is also sent out to the HID device
when a magnetic card is swiped on the reader. An event flag is set by the HID
device when data is available in the buffer. No additional driver is required.
(EM4100, EM4102, TK4100,ISO7810)
MX53-M2 List:
53-KB-M2-UID
Ver. 4.6 Product ID:30
Magnetic card reader with
Mifare S50 ID# reader,
Keyboard output
Use this firmware on the MX53 with a Mifare 13.56 MHz RFID “M2” add on
Module only. The three track magnetic card
reader
option can be turned off if
desired using the setup utility. The unique random serial number on the RFID card
is
Read
automatically and typed out as if someone manually typed the number.
Magnetic card data is also typed out when a magnetic card is swiped on the reader.
This firmware creates a second HID keyboard attached to the system. No special
driver is required. (Mifare M50, M70, ISO-14443A)
53-VRS-M2-UID
Ver. 4.0 Product ID:31
Magnetic card reader with
Mifare S50 ID# reader,
Virtual USB Serial output,
ASCII Data
Use this firmware on the MX53 with a Mifare 13.56 MHz RFID “M2” add on
Module only. The three track magnetic card
reader
option can be turned off if
desired using the setup utility. The unique random serial number on the RFID card
is
Read
automatically and sent out directly to the virtual serial Com port. Magnetic
card data is also sent out to the virtual serial Com port when a magnetic card is
swiped on the reader. This firmware will create a serial device attached to a Com
port. Use the MX5.INF install file to automatically install the appropriate Microsoft
Drivers provided with the OS. The MX5 setup utility when installed will provide
this INF file. No additional drivers are required. (Mifare M50, M70, ISO-14443A)
53-HID-M2-UID
Ver. 1.0 Product ID:32
Magnetic card reader with
Mifare S50 ID# reader, HID
Use this firmware on the MX53 with a 13.56 Mhz RFID "M2" Module only. The UID
on the RFID card is Read automatically and sent to Track 1 of the HID Device in
Mag-Tek report format. This Report also includes Error status of each track, data
length and type of card read. The MX5 setup utility Help File has more details on this
