POSBank A10plus, Command Reference Manual, Page: 97 / 122

- 97 -
Rev. 1.50
A10plus MiniPrinter
CONFIDENTIAL
GS ( k [Name] Set up and print the symbol
[Format] ASCII GS ( k
Hex 1D 28 4B
Decimal 29 49 75
[Description] Processes the data for two-dimensional codes. (QR Code)
• Symbol type is specified by cn
• Function code fn specifies the function.
cn Fn Function No. Function name
49 65
Function 165
QR Code: Select the model
67 Function 167 QR Code: Set the size of module
69 Function 169 QR Code: Select the error correction level
80 Function 180 QR Code: Store the data in the symbol storage area
81 Function 181 QR Code: Print the symbol data in the symbol storage area
82 Function 182 QR Code: Transmit the size information of the symbol data in
the symbol storage area
•
pL , pH specifies ( pL + pH × 256) as the number of bytes after pH ( cn , fn , and
[parameters] ).
The [parameters] are described in each function.
[Notes]
■
The function is specified with the function code (fn). Details of the performance differ
according to the function.
[Notes for transmission process]
■
Transmission process is performed by <Function 182>.
When you use this command, obey the following rules.
• After the host PC transmits the function data, the printer will send response data