- 72 -
Rev. 1.50
A10plus MiniPrinter
CONFIDENTIAL
GS P
[Name]
Set horizontal and vertical motion units
[Format]
ASCII
GS
P
x
y
Hex
1D
50
x
y
Decimal
29
80
x
y
[Range]
0
≤
x
≤ 255
0
≤
y
≤ 255
[Default]
x
= 180
,
y
= 360
[Description]
Sets the horizontal and vertical motion units to approximately 25.4/
x
mm {1/
x
"}
and approximately 25.4/
y
mm {1/
y
"}, respectively.
• When
x
= 0, the default value of the horizontal motion unit is used.
• When
y
= 0, the default value of the vertical motion unit is used.
[Notes]
■ The horizontal direction is perpendicular to the paper feed direction and the vertical
direction is the paper feed direction.
■ The horizontal and vertical motion units indicate the minimum pitch used for calculating
the values of related commands (shown on the next screen).
■ In standard mode, the following commands use
x
or
y
.
• Commands using
x
:
ESC SP, ESC $, ESC \, GS L,
and
GS W
• Commands using
y
:
ESC 3, ESC J, ESC K, GS A
and
GS V
■ In page mode, the following commands use
x
or
y
, when the starting position is set to
the upper left or lower right of the print area using
ESC T
.
• Commands using
x
:
ESC SP, ESC $, ESC W, ESC \
and
FS S
.
• Commands using
y
:
ESC 3, ESC J, ESC K, ESC W, GS $, GS A, GS V,
and
GS \
■ In page mode, the following commands use
x
or
y
, when the starting position is set to
the upper right or lower left of the print area using
ESC T
.
• Commands using
x
:
ESC 3, ESC J, ESC K, ESC W, GS $,
and
GS \
• Commands using
y
:
ESC SP, ESC $, ESC W, ESC \, FS S, GS A
and
GS V