POSBank A10plus, Command Reference Manual, Page: 48 / 122

- 48 -
Rev. 1.50
A10plus MiniPrinter
CONFIDENTIAL
ESC a [Name] Select justification
[Format] ASCII ESC a n
Hex 1B 61
n
Decimal 27 97 n
[Range] 0
≤
n
≤ 2, 48 ≤
n
≤ 50
[Default]
n
= 0
[Description]
In standard mode, aligns all the data in one line to the selected layout, using n as follows:
n Justification
0, 48 Left justification
1, 49 Centered
2, 50 Right justification
[Notes]
■ When standard mode is selected, this command is enabled only when processed at the
beginning of the line in standard mode.
■ The justification has no effect in page mode. If this command is processed in page mode,
an internal flag is activated, and this flag is enabled when the printer returns to standard mode.
■ This command executes justification in the print area set by
GS L and GS W .
■ This command justifies printing data (such as characters, all graphics, bar codes,
and two dimensionl codes) and space area set by HT , ESC $ , and ESC \ .
■ The settings of this command are effective until
ESC @ is executed, the printer is reset,
or the power is turned off.