- 57 -
Rev. 1.50
A10plus MiniPrinter
CONFIDENTIAL
■ If the NV bit image exceeds one line of print area, the printer does not print it.
■ The scales for width and height of NV bit images are specified by
m
. Therefore,
in page mode with 90° or 270° clockwise-rotated NV bit image, the printer applies
print area and dot density from [width: direction of paper feed, height: perpendicular to
direction of paper feed].
■ This command is not affected by print modes (such as emphasized, underline, character
size, or 90° rotated characters), except upside-down print mode.
■ This command executes paper feed for amount needed for printing the NV bit image
regardless of paper feed amount set by a paper feed setting command.
■ After printing the bit image, this command sets the print position to the beginning of the line.
■ When printing the NV bit image, selecting unidirectional print mode with
ESC U
enables
printing patterns in which the top and bottom parts are aligned vertically.
■ The NV bit image is defined by
FS q
.