Troubleshooting
ROBO-8771VG2 User’s Manual
5-3
IRQ #8
Real-time Clock
IRQ #9
Microsoft ACPI-Compliant System
IRQ #10
Unassigned
IRQ #11
Unassigned
IRQ #12
PS/2 mouse
IRQ #13
Data Processor
IRQ #14
Primary IDE Controller
IRQ #15
Secondary IDE Controller
It is then very easy to find out which IRQ resource is ready for additional
peripherals. If IRQ resource is not enough, please disable some devices listed above
to release further IRQ numbers.
5.3 FAQ
Unboot problem
Symptom: SBC keeps beeping, and no screen has shown.
Solution:
In fact, each beep sound represents different definition of error message.
Please refer to table as following:
Beep sounds
Meaning
Action
One long beep with one
short beeps
DRAM error
Change DRAM or reinstall it
One long beep constantly DRAM error
Change DRAM or reinstall it
One long beep with two
short beeps
Monitor or Display
Card error
Please check Monitor connector
whether it inserts properly
Beep rapidly
Power error warning Please check Power mode setting
Symptom: There is neither no beeps nor screen output.
Solution:
Indeed, you can do the stand-alone to identify the root cause by isolating
the board from other possible system devices such as PCI device,
backplane, and so on. If the system still cannot boot up, please fill out
RMA from which is provides on Portwell website, and then send back to
Portwell as a RMA. Besides, you also visit RMA site
(http://www.portwell.com.tw/rma/login.asp) to check RMA report if
necessary.
Installation Problem