BIOS Setup Information
ROBO-8771VG2 User’s Manual
4-13
AC97 Audio
[Enabled] or [Disabled] legacy support of AC97 cordec.
The choice: Enabled, Disabled.
Init Display First
Setting display output sequence.
The choice: PCI Slot, Onboard/AGP.
hoenix- AwardBIOS CMOS Setup Utility
Super IO Device
Item Help
Onboard FDC Controller
[Enabled]
Onboard Serial Port 1
[3F8/IRQ4]
Onboard Serial Port 2
[2F8/IRQ3]
UART Mode Select
[Normal]
X RxD, TxD Active
Hi, Lo
X IR Transmission Delay
Enabled
X UR2 Duplex Mode
Half
X Use IR Pins
IR-Rx2Tx2
Onboard Parallel Port
[378/IRQ7]
Parallel Port Mode
[SPP]
X EPP Mode Select
EPP1.7
X ECP Mode Use DMA
3
PWRON After PWR-Fail [Off]
Menu Level
f
↑↓→←
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Onboard FDC Controller
This item allows enable/disable onboard Floppy disk controller.
The choice: Enabled, Disabled.
Onboard Serial Port 1/Port 2
Select an DDR and corresponding interrupt for the first and second serial ports.
The choice: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.
