BIOS Setup Information
ROBO-8771VG2 User’s Manual
4-12
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA/33/66/100 implementation is possible only if IDE hard drive supports
and the operating environment includes a DMA driver (Windows 95 OSR2 or a
third-party IDE bus master driver). If your hard drive and system software both
support Ultra DMA/33/66/100, select Auto to enable BIOS support.
The choice: Auto, Disabled.
Phoenix- AwardBIOS CMOS Setup Utility
Onboard Device
Item Help
USB Controller
[Enabled]
USB 2.0 Controller
[Enabled]
USB Keyboard Function
[Enabled]
USB Mouse Function
[Enabled]
AC97 Audio
[Auto]
Init Display First
[PCI Slot]
*** USB Mass Storage Device Boot Setting ***
Menu Level
f
↑↓→←
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
USB 1.0/2.0 Controller
This entry is for disable/enable EHCI controller only. This BIOS itself may/may
not have high speed USB support built in, the support will be automatically turn on
when high speed device were attached.
The choice: Enabled, Disabled.
USB Keyboard Function
This item allows enabling USB keyboard function under POST, BIOS setup menu,
DOS, or Windows-NT with no USB driver loaded.
The choice: Enabled, Disabled.
USB Mouse Function
[Enabled] or [Disabled] legacy support of USB Mouse.
The choice: Enabled, Disabled.
